D-Link Networking DGS-1210-10MP 10PT Smart Managed Gigabit PoE Switch Borwn Box

Description

With increased Power over Ethernet (PoE) output and advanced Layer 2 features, the DGS-1210 Series provides a cost-efficient and flexible solution for expanding any business network.

Fibre Uplinks
The Fibre Uplinks integrate advanced management as well as security functions that provide performance and scalability making it suitable for business use.

PoE
The DGS-1210 Series includes a range of high power budget PoE-enabled switches for businesses looking to power VoIP phones, wireless access points or network cameras.

Energy Saving
Incorporating D-Link Green technology, the DGS-1210 Series switches are capable of power-saving without sacrificing operational performance or functionality. Taking the approach to green IT one step further this series incorporates a special chipset with advanced silicon technology for efficient use of energy.
Number of 10/100/1000BASE-TX ports
8 ports
Number of SFP ports
2 ports
PoE Supported Models
Standard(s): 802.3af/802.3at
Number of Ports : 8 ports
Maximum Power Budget : 130W
Switch Capacity
20 Gbps
64-Byte Packet Forwarding Rate
14.88 Mpps
MAC Address Table Size
16K (except DGS-1210-26, which support 8K)
Packet Buffer
0.5 MB per device
Jumbo Frame
Up to 9,216 Bytes
Power Consumption (Standby/Maximum)
9.4W / 148.7W (PoE on)
Power Input
10 to 240 VAC, 50/60HZ internal universal power supply
Ventilation
fanless
Heat Dissipation
519.51 BTU per hour
Temperature
Operating: -5^o to 50^oC (23^o to 112^oF)
Storage: -20^o to 70^oC (-4^o to 158^oF )
Humidity
Operating: 0% to 95% non-condensing
Storage: 0% to 95% non-condensing
Certification
CE Class A, VCCI Class A, FCC Class A, cUL, CE (LVD), BSMI, CCC, C-Tick
Software Feature
L2 Features:
MAC Address Table: 8K entries
IGMP Snooping:
– IGMP v1/v2 Snooping
– Supports 256 IGMP groups
– Supports at least 64 static multicast addresses
– IGMP per VLAN
– Supports IGMP Snooping Querier
Loopback Detection
802.3ad Link Aggregation: Maximum of 8 groups/8 ports per group
LLDP
LLDP-MED
Jumbo Frame: Up to 9,216 bytes
Spanning Tree Protocol:
– 802.1D STP
– 802.1W RSTP
– 802.1s MSTP (for DGS-1210-28MP only)
Flow Control:
– 802.3x Flow Control
– HOL Blocking Prevention
Port Mirroring:
– One-to-One
– Many-to-One
– Supports Mirroring for Tx/Rx/Both
Multicast Filtering:
– Forwards all unregistered groups
– Filters all unregistered groups
Configurable MDI/MDIX: MLD snooping v1/v2 (256 groups)
VLAN
802.1Q
VLAN Group: Max. 256 static VLAN groups
Configurable VID from 1 4094
Asymmetric VLAN
Auto Voice VLAN:
– Max. 10 user-defined OUI
– Max. 8 default OUI
Auto Surveillance VLAN
Quality of Service (QoS)
802.1p Quality of Service
8 queues per port
Queue Handling:
– Strict
– Weighted Round Robin (WRR)
Bandwidth Control: Port-based (Ingress/Egress, min granularity 10/100/1000 is 16 Kbps)
QoS based on:
– 802.1p Priority Queues
– DSCP
– MAC address1
– EtherType1
– IP address1
– Protocol type1
– ToS
– IP preference1
– IPv6 Traffic Class
– TCP/UDP port
L3 Features
IP Interface: Support 4 interfaces
IPv6 Neighbor Discovery (ND)
Static Routing: 124/50 IPv4/6 Static Route Entries
Access Control List (ACL)
Max. 50 access list
Max. 768 rules shared by IPv4, MAC and IPv6
Each rule can only be associated with a single port
ACL based on:
– MAC address
– 802.1p priority mask
– VID mask
– Source/destination MAC address mask
– EtherType mask
IP address:
– Source/destination IP address mask
– DSCP mask
– Protocol type mask
– TCP/UDP port number mask
IPv6 address:
– Source/destination IP address mask
– DSCP mask
– Protocol type mask
– TCP/UDP port number mask
– IPv6 traffic class mask