Description
• With a single Cat6 cable, you can easily extend HDMI audio/video signals up to 394ft (120m) with our 1×4 HDMI Splitter HDbitT over IP Extender Kit – 120m. Direct 1-to-1 connection, 1-to-Many through Gigabit network switches. Additional receivers, part# CE-H26U11-S1), are sold separately
• Features cascade connection of up to 30 receivers per transmitter. 1-to-many configuration through 1) Unmanaged/Dedicated Gigabit switches, 2) Smart Gigabit switches with VLAN to segregate video traffic from the rest of the LAN. Many-to-many configuration is also supported via VLAN setups. Note that each VLAN can only accommodate 1 transmitter (TX). Note: We recommend using SIIG’s 24-port AV Over IP Smart Ethernet Switch, part# CE-SW0111-S1, sold separately
• Delivers crystal clear Full HD content up to 1080p@60Hz resolution. Supports up to 1080p; supports 408i/480p @60Hz, 576i/576p @50Hz, 720p @50/60Hz, 1080i/1080p @50/60Hz; Auto adjustment for different cable lengths to produce the best video/audio experience. Supports 2-channel Stereo Audio. * Note: There’s a 250ms or less delay/latency due to data compression. Not recommended for real-time applications, such as PC gaming
• IR remote control through Cat6 cable allow source device to recognize remote commands; You can control the HDMI source device at a secondary location with the included IR cables that forward commands over a Cat6 cable for convenience. We recommend using high performance pure COPPER Cat6 cables to ensure reliable performance
• High quality durable surface mountable metal housing with ventilation panels provides excellent heat dissipation and a higher level of RF/EMI shielding to ensure reliable performance and system stability during long hours of non-stop operation
• Plug-n-Play installation, no software installation required, backed by a 2-year limited warranty
Transport protocol:
HDbitT
Compliant with HDMI 1.3 and HDCP 1.2
Transmission distance:
Up to 394ft (120m) via single Cat6 cable at 1080p at 60Hz resolution
Video resolution:
480p / 720p / 1080i / 1080p at 60Hz
Audio input:
7.1 Channel, PCM, DTS, AC3 audio
IR signal:
Unidirectional full frequency 20KHz to 60KHz
Housing:
Aluminum wall mount design
Network cable:
UTP/STP CAT6/6a/7, solid copper
Connection topology:
Direct connection: 1×4
Cascade: 1-to-many through dedicated IGMP Gigabit switches, up to 30 receivers per TX
Transmitting unit (TX):
Connectors:
1x 19-pin HDMI, Type A, Female, Input
1x 3.5mm jack, IR blaster, Output
4x 8-pin, RJ45, HDbitT signal, Output
1x Power jack, 5V/2A, Input
1x Reset button
Receiving unit (RX):
Connectors:
1x 19-pin HDMI, Type A, Female, Output
1x 3.5mm jack, IR receiver, Input
1x 8-pin, RJ45, HDbitT signal, Input
1x Power jack, 5V/1A, Input
1x Reset button
Power adapter:
Input: 100-240V / 50-60Hz
TX: DC 5V/2A
RX: DC 5V/1A
UL listed: E335801 / Level: VI
Environmental conditions:
Operating temperature: 32 to 122 degrees F
Storage temperature: 14 to 158 degrees F
Relative humidity: 0 to 90% RH (non-condensing)
Certifications/Standards:
FCC, CE, RoHS
Item Dimension (L inchxW inchxH inch)
3 x 15 x 9
Weight
5.50 lb
Warranty Information
2 Years
Reviews
There are no reviews yet.