Startech Networking IES81GPOEW 8PT Gigabit Ethernet Switch 4 PoE+ Managed Wall Mount with Front Access

Description

Easily deploy or scale your network with this Gigabit Ethernet switch, by adding eight copper Gigabit Ethernet (GbE) connections, including four PoE+ ports. This IP30 industrial network switch provides intelligent Layer 2 management. Its rugged, compact design and wall-mount option with front access make it ideal for demanding applications, even where space is limited.

Expand your network
This Gigabit Ethernet switch lets you expand your network by connecting up to eight RJ45 devices (four PoE+). The 8-port switch enables up to eight users to share files and devices, such as printers and scanners, over a LAN connection, by enhancing your existing network capacity with additional ports.

Supports PoE+ for flexible use
The switch gives you the freedom to place your equipment in locations where power outlets are not available, with support for Power over Ethernet Plus. The network switch provides abundant PoE power, with up to 30 watts for each PoE port (120W budget).

Wall-mountable with front access
With its compact design, you can wall-mount the Gigabit switch to provide convenient front access to ports and indicators. It’s ideal for a wide range of applications, including tight installation areas with significant electromagnetic interference, such as control cabinets and panels. The network switch is also DIN-rail mountable.
Hardware
Industry Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3u 100BASE-FX, IEEE 802.3z 1000BASE-SX,IEEE 802.3z 1000BASE-LX, 4-Port IEEE 802.3af/at Power over Ethernet end-span PSE
Ports: 8
Performance
Auto MDIX: Yes
Buffer Size: 512 KB
Compatible Networks: 10/100/1000 Mbps
Flow Control: IEEE 802.3x pause frame for full-duplex, back pressure for half-duplex
Full Duplex Support: Yes
Jumbo Frame Support: 9K max.
Maximum Cable Length: 328 ft (100 m)
Maximum Data Transfer: Rate 2 Gbps (Full-Duplex)
MTBF: > 100,000 hrs at 25 degrees C
Supported Protocols: IEEE 802.3ad Port Trunk with LACP, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1p Class of Service, RFC 3810 MLD version 2, RFC 792 ICMP, RFC 2068 HTTP, RFC 1112 IGMP version 1, RFC 2236 IGMP version 2, RFC 3376 IGMP version 3, RFC 2710 MLD version 1, IEEE 802.1Q VLAN Tagging, IEEE 802.1x Port Authentication Network Control, bIEEE 802.1ab LLDP, RFC 768 UDP, RFC 793 TFTP, RFC 791 IP
Surge Protection: 6kV ESD, 6kV EFT
Switching Architecture: Store-and-Forward
Connector(s)
Connector Type(s): 4 – RJ-45 Female, 4 – RJ-45 (PoE+) Female, 1 – Terminal Block (3 Wire) Male
Special Notes / Requirements
Note
4 ports support IEEE 802.3at Power over Ethernet Plus (PoE+) and IEEE 802.3af Power over Ethernet (PoE)
Supports PeE Powered Device alive check, scheduled power recycling, and time-based PoE schedule
PoE power up to 30W per PoE+ port (120W budget) and remote PoE power control
A power adapter is not included with this switch.
Indicators
LED Indicators: 1 Power, 8 – PoE Active (yellow), Link/Activity (green)
Power
Input Current: 1A minimum
Input Voltage: 12 to 48 DC
Plug Type: M
Power Source: Terminal Block
Environmental
Humidity: 5-95% RH (Non-Condensing)
Operating Temperature: -40^oC to 75^oC (-40^oF to 167^oF)
Storage Temperature: – 40^oC to 90^oC (-40^oF to 194^oF)
Physical Characteristics
Color: Black
Enclosure Type: Steel
Whats in the Box
Included in Package: 1 – network switch, 1 – terminal block connector, 4 – screw anchors, 4 screws, 4 – attaching pins, 4 – locking pins, 4 washers, 4 magnets, 1 – DIN rail, 3 – DIN-rail screws, 8 – RJ45 dust caps, 1 – quick-start guide
Item Dimension (L inchxW inchxH inch)
12 x 7 x 4

Weight
3.00lb

Warranty Information
2 Years