Supermicro Case CSE-213AC-R1K23LPB 2U 16x2.5 inch Hot-swap SAS-SATA E-ATX-ATX Brown Box

Description

This CPU heat sink is designed for Supermicro X11DPL-i motherboard with 2U and above chassis equipped with Intel® Xeon® scalable processors. The heat sink has been fully tested and validated by Supermicro to ensure the best quality and cooling performance.

Key Features
– Corporate Database

– Database Processing & Storage

– Enterprise Server

– HPC, Data Center

– iSCSI SAN

1. Dual socket P (LGA 3647) supports Intel® Xeon® Scalable Processors, 3 UPI up to 10.4GT/s

2. Up to 2TB ECC 3DS LRDIMM, up to DDR4-2666MHz; 16 DIMM slots

3. 3 PCI-E 3.0 x16, 4 PCI-E 3.0 x8 (slot 1 occupied by controller)

4. 12 Hot-swap 3.5″ SAS3/SATA3 direct attached drive bays

5. Broadcom 3108 SAS3 AOC

6. 2x 10GBase-T LAN ports with Intel X722 + PHY Intel X557

7. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN

8. 3 Hot-swap 8cm redundant PWM fans

9. 1200W Redundant Power Supplies Titanium Level (96%)
Processor/Cache
CPU:
– Dual Socket P (LGA 3647)
– Intel Xeon Scalable Processors, 3 UPI up to 10.4GT/s
– Support CPU TDP 70-205W
Cores: Up to 28 Cores with Intel HT Technology
System Memory
Memory Capacity:
– 16 DIMM slots
– Up to 2TB ECC 3DS LRDIMM, 512GB ECC RDIMM, DDR4 up to 2666MHz
Memory Type: 2666/2400/2133MHz ECC DDR4 SDRAM
On-Board Devices
Chipset: Intel C624 chipset
SAS:
– SAS3 (12Gbps) via Broadcom 3108 AOC HW RAID
– RAID 0, 1, 5, 6, 10, 50, 60
SATA: SATA3 (6Gbps) RAID 0, 1, 5, 10
Network Controllers: Dual 10GBase-T LAN ports with Intel X722 + PHY Intel X557
IPMI:
– Support for Intelligent Platform Management Interface v.2.0
– IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Video: ASPEED AST2500 BMC
Input / Output
LAN:
– 2 RJ45 10GBase-T LAN ports
– 1 RJ45 Dedicated IPMI LAN port
USB:
– 4 USB 3.0 ports (rear)
– 1 Type A
Video: 1 VGA port
Serial Port / Header: 1 Fast UART 16550 port / 1 Header
System BIOS
BIOS Type: 256Mb AMI UEFI
Management
Software:
– Intel Node Manager
– IPMI 2.0
– NMI
– SPM, SUM
– SuperDoctor 5
– Watchdog
PC Health Monitoring
CPU:
– Monitors for CPU Cores, Chipset Voltages, Memory.
– 4+1 Phase-switching voltage regulator
FAN:
– Fans with tachometer monitoring
– Status monitor for speed control
– Pulse Width Modulated (PWM) fan connectors
Temperature:
– Monitoring for CPU and chassis environment
– Thermal Control for fan connectors
Form Factor
2U Rackmount
Available Colors
Black
Front Panel
Buttons:
– Power On/Off button
– System Reset button
LEDs:
– Power status LED
– Hard drive activity LED
– Network activity LEDs
– System Overheat LED
– Power fail LED
Expansion Slots
PCI-Express:
– 3 PCI-E 3.0 x16 slot
– 4 PCI-E 3.0 x8 slots
– Slot 1 occupied by controller
Drive Bays
Hot-swap: 12 Hot-swap 3.5″ SAS3/SATA3 drive bays
Optional: 2 Optional Onboard NVMe M.2
Backplane
SAS3 12Gb/s direct attached storage backplane, w/ 24x SAS3 2.5″ drive slots
System Cooling
Fans: 3 Hot-swap 8cm redundant PWM cooling fans
Power Supply (76mm Width)
1200W Redundant Power Supplies with PMBus
Total Output Power: 1000W/1200W
Input:
– 100-127Vac / 15-12A / 50-60Hz
– 200-240Vac / 8.5-7A / 50-60Hz
– 200-240Vdc / 8.5-7A (for CCC only)
+12V:
– Max: 83A / Min: 0A (100-127Vac)
– Max: 100A / Min: 0A (200-240Vac)
– Max: 100A / Min: 0A (200-240Vdc)
+5Vsb: Max: 4A / Min: 0A
Output Type: 19 Pairs Gold Finger Connector
Certification: UL/cUL/CB/BSMI/CE/CCC
Operating Environment
RoHS: RoHS Compliant
Environmental Spec. :
– Operating Temperature: 10^oC to 35^oC (50^oF to 95^oF)
– Non-operating Temperature: -40^oC to 60^oC (-40^oF to 140^oF)
– Operating Relative Humidity: 8% to 90% (non-condensing)
– Non-operating Relative Humidity: 5% to 95% (non-condensing)
Item Dimension ( L inch x W inch x H inch)
30 x 23 x 14
Weight
61.00 lb
Warranty Information
1 Year